How to Read Your Countertop Dishwasher Manual: Step-by-step instructions on how to use the various options on your countertop dishwasher.
Step 1:
Plug in your countertop dishwasher. The power cord is located at the bottom of the dishwasher and has a twist-off cap that you need to remove before plugging it into an outlet. If you have a water heater, I recommend plugging it in there; otherwise, any wall outlet will do.
Once you have plugged it in and turned it on (there is a switch on the right side), take a look at the display. There are three lights: DELAY START, WASH, and RINSE. A light that is on means that feature is enabled; a light that is off means that feature is disabled.
Step 2:
Open up the detergent dispenser and add detergent if needed. You should not add detergent unless you are going to start a cycle immediately – otherwise, wait until just before starting your first cycle to add detergent (see step 4).
You can either pour detergent directly into the dispenser or use the included measuring cup. There are two compartments in the dispenser – one marked with a 1 for normal
How to Read Your Countertop Dishwasher Manual
Step-by-step instructions on how to use the various options on your countertop dishwasher.
1. Before operating your dishwasher for the first time, remove any stickers or tape from around the door.
2. Always use detergent specifically designed for automatic dishwashers to ensure proper cleaning and to avoid damage to the appliance.
3. The filter should be cleaned as needed, which may be daily or weekly depending on the amount of use and type of food particles in dishes.
4. To clean filter, open door of dishwasher and pull out bottom rack. Grasp top of filter cover in center of floor pan and turn counterclockwise until cover pops open (see figure 1). Lift out cover and spray arm, then remove large filter (see figure 2), being careful not to lose O-ring gasket that is attached to filter (see figure 3). Rinse filter thoroughly in sink using hot water. Reattach O-ring gasket to filter and reassemble parts in reverse order.
5. To add detergent, fill prewash cup (located behind door), rinse aid dispenser (located inside top right corner of dishwasher interior), and main wash cup
Let’s face it: countertop dishwashers can be confusing. Thankfully, the instructions on how to use them don’t have to be.
Once you’ve gotten your countertop dishwasher home, simply follow these step-by-step instructions to learn how to operate each of the various functions of this appliance.
1. Open your countertop dishwasher door. If it doesn’t open right away, try pushing harder or pulling with more force. If this doesn’t work, consult a professional repairman or countertop dishwasher expert for assistance.
2. Place your dishes in the appropriate slots on the interior racks of the countertop dishwasher. Some common items you may wish to put into your countertop dishwasher include: plates, utensils, cups and glasses, small pots and pans (no larger than 6 inches in diameter), and anything else that is marked as “dishwasher safe” by the manufacturer of that item. Do not place bowls or other dishes larger than 6 inches in diameter into the unit; doing so may cause damage to your countertop dishwasher and void its warranty! Also, never put silverware into the top rack of your unit; doing so will result in damage to both your silverware and your appliance!
Step 1:Turn on your countertop dishwasher. Open the door to your dishwasher and push either the “Power” or “Start” button, depending on the model of the unit. Some dishwashers may require you to press both buttons simultaneously.
Step 2: Select a washing cycle. Press the “Cycle” button on your countertop dishwasher until your desired cycle is indicated on the display. Pressing the button will cycle through these options:
Heavy Wash – For heavily soiled dishes that require a deep clean
Normal Wash – For moderately soiled dishes like those used with breakfast and lunch
Light Wash – For lightly soiled dishes, such as those used for dessert or snacks
Rinse – A short rinse cycle to remove airborne contaminants from clean dishes before they are put away
Step 3: Add detergent to your countertop dishwasher. Open the detergent dispenser and add a low-phosphate powder detergent, such as Cascade Complete Powder, or a concentrated gel dishwashing soap like Palmolive Pure + Clear. Use only half of the amount recommended for an average-sized load in a full-sized machine. If you are using a powder-based soap, place it in a dry dispenser; if using a
Most countertop dishwashers have six settings to choose from and one or more buttons to press. This article will help you understand the various settings, features and functions available on your countertop dishwasher so you can use it like a pro!
Congratulations on your purchase of a C3D1 countertop dishwasher.
This dishwasher is specially designed for the demands of high-volume, short-order kitchens. It handles standard racks which are easy to load and unload, or high-capacity racks which can hold 50% more dishes per rack.
A variety of cycle options let you customize your dishwashers performance to meet your needs. Cycles vary in both running time and water temperature, and all cycles automatically end with a final rinse and a high-temperature sanitize cycle.
The C3D1 has been designed with ease-of-use in mind. All controls are located on the unit’s control panel, which tilts up so that it can be easily accessed from a standing position. The control panel is protected by a door that stays shut during operation, but opens easily so that you can access any controls while the machine is running. This dishwasher has been tested to NSF/ANSI Standard 184 and is certified by ETL to be in compliance with this standard. The NSF seal indicates that the product conforms to health and safety standards set by the National Sanitation Foundation, an independent testing organization in Ann Arbor, Michigan.
Your dishwasher has been tested
You can also set the wash temperature to one of four water temperatures: Energy Saving, Normal, Heavy, and Sanitize. Here are some guidelines as to when you should use each temperature setting:
Energy Saving is the default setting for most cycles. It uses the lowest temperature possible (around 120° F) and will save you money on your electric bill. This is a great setting for most loads.
Normal is another good option for most everyday loads. This setting will heat water to around 140° F and should be used in most cases unless cleaning is an issue.
Heavy is a good choice if you’re washing heavily soiled dishes or casserole dishes, pots and pans, or even baby bottles with dried milk residue. This setting heats water to around 160° F; this is the highest water temperature recommended by manufacturers for energy-efficient dishwashers.
Sanitize uses hot water at around 165° F to kill bacteria that may be present on your dishes (which can sometimes happen with non-disposable plates). This is a good cycle to use if you have someone in the house with a lowered immune system, such as an elderly or sick person who might be more susceptible to infection from bacteria or food poisoning from contaminated dishes.