The damage to the motherboard is the most feared problem of any computer user. The motherboard is the foundation of your computer. It holds all of your components together, and it allows each one to communicate with the other. If a motherboard is damaged, you’ll probably need to replace it.

Here are nine ways to prevent motherboard damage.

1. Keep Out of Dusty Areas

Dust can be detrimental to all parts of your computer, especially your motherboard. Dust can cause overheating and possible shorting out if left unchecked.

2. Prevent Static Electricity Buildup

Static electricity is a killer for motherboards (and other computer hardware). Ground yourself before handling any hardware in or out of your machine by touching any unpainted metal surface. Do not wear clothing made from synthetic materials such as nylon or polyester, as these can build up static electricity on your body. Use an antistatic wrist strap if necessary, and make sure that you have a rubber mat beneath you when working on your computer’s internals.

3. Avoid Electrical Interference

If possible, keep your computer away from direct sunlight or any electrical devices that may cause electrical interference such as televisions and microwaves. The best location for a desktop PC is on the floor, away

Whether you’re a seasoned techie or an electronics newbie, you may want to take a close look at the following list of 9 common ways people destroy their motherboards.

1. Moving Components

If you’re working on a PC while it is powered up, you may be tempted to rearrange its internal components. For example, you might want to move the graphics card to a different slot or free up space around the CPU by relocating cables and add-in cards. Never make such changes while your PC is running! Any time you touch an electrical component that’s powered on, there’s a chance that static electricity will fry it.

2. Overclocking

Overclocking involves making your processor run faster than the manufacturer’s specifications intended. That may sound like a great idea until your motherboard fries itself trying to keep up with the extra load. Before overclocking, consider the processor’s thermal design power (TDP), which indicates how much heat it generates when running at full speed. If the TDP is too high for your motherboard to handle, overclocking could spell disaster.

3. Not Using A Heat Sink

All motherboards come with a heat sink that draws heat away from electrical components

One of the most common causes of motherboard damage is improper handling. When working with delicate components, make sure that you wear a static-free wrist strap, and take other precautions to ensure that your body does not come into contact with any circuitry.

Another common cause of motherboard damage is electrostatic discharge (ESD). In addition to wearing a static-free wrist strap, consider using an electrostatic pad on which you can place your laptop while you work on it.

Excessive heat is another common cause of motherboard damage. Make sure that you don’t leave your laptop in direct sunlight, and avoid exposing it to extreme temperatures (either hot or cold). Also make sure that the vents on your laptop are clean and unobstructed.

Power surges are another potential threat to the integrity of your motherboard. If you live in an area with frequent power fluctuations, consider installing a surge protector, which will prevent sudden spikes in voltage from reaching your laptop.

If you’re building your own PC or doing some major hardware upgrades, then you need to know how to prevent motherboard damage. Not only is this something you want to avoid for the sake of your computer, it’s also something you want to avoid for the sake of yourself. Because when a motherboard fails, it ends up being a pretty big deal for everyone involved.

The motherboard is arguably the most important part of any computer. Without it, nothing else that you do will really matter in the long run. It’s the backbone of your system and without it working properly, your computer just isn’t going to work at all. Even with the best parts in place like a powerful CPU and graphics card, if your motherboard can’t use those parts correctly then they won’t be used correctly at all.

For this reason and many others, knowing how to prevent motherboard damage is an essential skill that any decent PC builder should have in their repertoire. And even if you aren’t building a PC from scratch or doing any major upgrade work, learning how to take care of your motherboard will still serve you well as it helps extend its life span and ensure that it stays working properly for as long as possible.

1. Don’t work in a crowded environment.

2. Shield your power supply from static electricity.

3. Make sure you have the proper tools for the job.

4. Never touch anything on the motherboard except with an anti-static device.

5. Remember that motherboards are fragile, delicate devices.

6. Never use water to clean a motherboard — or anything else inside a computer, for that matter.

7. Never attempt to operate a motherboard outside of its case — unless absolutely necessary.

8. Never operate a motherboard without a case fan and proper ventilation — unless absolutely necessary.

9. Check your work before turning on your computer!

1. Read the manual

2. Protect against static electricity

3. Don’t ground yourself on the metal of your PC

4. Unplug the power before installing a motherboard

5. Keep it clean, inside and out

6. Don’t install the motherboard on carpeting or other soft surface

7. Keep liquids away from your PC

8. Don’t work in a humid environment

9. Be careful when removing components

An Institutional Review Board (IRB) is a committee that has been formally designated to approve, monitor, and review biomedical and behavioral research involving humans with the aim of protecting the rights and welfare of the research subjects.

Are you looking for an experienced professional to handle your IRB application? We provide assistance in developing, editing, and submitting all required documentation for your IRB application.

Reasons to use our IRB services:

1. Full service offering from protocol design to submission

2. Customized packages based on your budget and needs

3. Unlimited edits until approval

4. Expert guidance from PhDs and MDs who have over 15 years of experience in clinical research

5. Support for all types of studies including industry-sponsored trials, investigator-initiated trials, and non-clinical/behavioral studies

6. All work is done in the United States