The Best Tips to Keep Your Dishwasher Clean and Avoid Costly Repairs
A blog on how to keep your dishwasher clean and how to avoid costly repairs in the future.
By: Matt Lettieri
The Best Tips to Keep Your Dishwasher Clean and Avoid Costly Repairs
With Spring cleaning right around the corner, there are many things you should be looking at in your house. One of those things is your dishwasher. It may seem like it doesn’t need cleaning, but that couldn’t be further from the truth. In fact, not regularly cleaning your dishwasher can lead to some costly repairs down the line. Fortunately, there are a few simple things that you can do to make sure your dishwasher is kept in tip-top shape. Here are some of our tips for keeping your dishwasher clean and avoiding costly repairs:
Tip 1: Check Your Hoses Regularly!
One of the most common (and most costly) issues with a dishwasher is an issue with the hoses. These hoses are what connect your dishwasher to both water and electricity, which means they have a lot of responsibility when it comes to keeping your dishwasher functioning properly. If a hose bursts or is damaged, it can result in a flood,
The best way to keep your dishwasher clean and avoid costly repairs in the future is to maintain it regularly. This means that you need to take care of any problems that arise and address them immediately to prevent them from getting worse. The following tips will help you keep your dishwasher clean and avoid costly repairs in the future.
If you want to keep your dishwasher clean and avoid costly repairs in the future, you need to make sure that it is cleaned regularly. You should be cleaning your dishwasher at least once per week with a soft cloth or sponge. This will remove any food particles that are stuck on the inside of the dishwasher.
A dishwasher may be one of the most convenient appliances you could have in your kitchen. You just load it up, hit the start button and that’s it—you’re done! However, like any other appliance in your home, the dishwasher needs proper care and maintenance to function properly and to minimize the risks of costly repairs.
Here are some tips on how to keep your dishwasher clean and avoid costly repairs in the future:
1. Empty it after every use.
The food particles and other bits of debris that remain in the filter can become smelly over time. As such, you should empty your dishwasher after every use. If possible, scrape off any food particle from your dishes before putting them in the dishwasher. This will make cleaning easier for you in the future.
2. Clean the filter regularly.
Make it a habit to clean your dishwasher’s filter at least once a month or a couple of times a year depending on how often you use it. You can clean it by running some warm water through it until all the food particles are completely removed. You should also clean the filter arm so that they don’t clog and prevent proper water circulation inside your machine. If you’re not sure where this is located, refer to
Dishwashers are one of the most used appliances in the home. It is a must have for every family because it saves you time and effort when cleaning dishes after every meal.
Dishwashers are usually built to last for a long time but without proper maintenance, they can break down sooner than you think. To avoid costly repairs, here are some tips to keep your dishwasher clean:
1. Clean The Filter
The filter traps food particles before they can reach the drain pump. If it becomes clogged with food debris, it will not be able to do its job efficiently. Over time, if your filter becomes too clogged with debris, your dishwasher will start to leak water or may even stop working completely.
To clean the filter, remove the lower rack and locate the filter assembly on the bottom of the tub. The assembly should be located in front of the motor and drain tube; it should look like a black plastic disk or cylinder that can be unscrewed or removed by twisting or pulling. When you find this disk or cylinder, remove it from the tub and wash it thoroughly with warm water and soap.
2. Clean the Spray Arms
The spray arms spray hot water onto your dishes during the wash cycle to rinse
Disclosure – This site uses affiliate links and earns commissions from purchases made through the links in this post.
I’m sure you’ve heard the news by now that Beko have issued a recall on their dishwashers due to a fire risk but even if you don’t have a Beko dishwasher there are still plenty of steps you can take to ensure your dishwasher is kept clean and safe.
If your dishwasher is no longer working as well as it should, or has broken down completely, before calling out an appliance engineer there are some simple things you can try yourself to see if the issue can be resolved.
You can normally find all the information you need regarding your dishwasher in the instruction manual (if you still have it) but if not, there are often user manuals available online. Many appliance manufacturers also offer video guides on how to fix any common faults.
The only thing worse than cleaning your kitchen, is having a dirty dishwasher. Unfortunately, many people do not regularly clean their dishwashers. In fact, the average dishwasher goes about three years between cleanings. This can cause serious problems, such as an unpleasant odor and bacteria buildup. If you want to keep your kitchen clean and protect yourself against quickly spreading bacteria, it is important to regularly clean your dishwasher.
Here are some tips on how to keep your dishwasher in tip-top shape:
1. Cleaning the Dishwasher Interior and Exterior
The first step in cleaning a dishwasher is to give the interior and exterior a good scrubbing with a sponge or soft brush. Use a solution of mild soap and water to wipe away any debris stuck on the door and exterior of the dishwasher. After wiping it down with soapy water, thoroughly rinse off all remaining residue with plain water. You can use the same soapy water solution to clean the interior of the dishwasher. Make sure you don’t miss any spots by getting into every nook and cranny, including around the silverware racks, inside the spray arms and around garbage disposal blades if your model has them.
2. Cleaning Interior Filters
If your model has
TIP 1: CLEAN THE TRAP
The first step of most dishwasher repairs is to clean the trap. The trap is designed to catch food particles and keep them from recirculating on your dishes. But, if you don’t empty it after each load, the trap can become clogged and cause a whole host of problems, including a foul odor, water not draining properly, or even the unit leaking. Unclog a clogged dishwasher trap by removing the bottom rack and unscrewing the access panel. Use gloves and be ready for dirty water to spill out. Remove any debris that is clogging up the filter.